BQE | ergonomic work chairs
Discover our high-quality ergonomic chairs that
have been specially developed for various occupational groups.
Ergonomic work chair
an investment in yourself
BQE encourages good working posture and drastically reduces pain. Even better, we make them disappear. How do we do this? Through our good ergonomic work chairs with correct seat and back rest. Our range is developed for seated professions:
Above, you can see our entire ergonomic work chairs range. We understand that you may not immediately know which chair is most suitable for you, which is why we are happy to advise you on the right choice. Request a free consultation below. Buying an ergonomic work chair is not something you do lightly. We are happy to help! A BQE chair ensures a pleasant, correct and active sitting posture.
Frequently asked questions
- Setting
- Test period
- Ordering and delivery
- Design
- Upholstery
- Castors and accessories
- Maintenance
- Technical questions
- Service and repair
- Pricing and billing
- Warranty
- Other questions
Setting
Please refer to our instruction videos or instructions for use on the page of your chair of choice. If you still have questions about your setting afterwards, please contact us by telephone for advice. There is no charge for this.
Yes, you can. We do charge for this and work by appointment only.
Yes, you can. Click here for more information on workplace consultancy.
With the Dynamic, you can move the front resistance knob down slightly to make tilting the seat harder. Moving the resistance knob at the front upwards makes tilting the seat lighter.
For the ComfortMove, the CorrectSit and the ErgoSolex, this is no problem. With the Dynamic, it is slightly more difficult because this chair uses a weight adjustment for the tilt mechanism. It is recommended to readjust the chair for each person.
Yes, you can. You can fit a higher gas spring. Your gas spring has a length of 19, 23, 31 or 37 cm. measured at the wide end of the gas spring. Click here to request a new gas spring using the service and repair form. On this form you can also find under downloads in the form "disassembly Dynamic" how to replace the gas spring.
You can adjust the weight setting (black star knob on the front) by moving it down step by step. If this does not solve the problem, the gas springs of the tilt mechanism may be worn out. You can submit a repair request for this. click here for the repair form.
Does your seat tilt back sufficiently? If not, you can adjust the Dynamic's weight setting (black star knob on the front) by moving it upwards step by step. Your seat will then not only remain in the forward-tilted position but also tilt backwards. With the CorrectSit and the ErgoSolex, you can adjust the tilting position with the lever on your left. On the ComfortMove and fixed models, the tilting position is not adjustable. If the problem is not caused by the tilting mechanism, it may be that you are wearing smooth (nylon-containing) clothing. If possible, adjust your clothes accordingly. Your saddle may also have become slippery. Clean your saddle with soap and water and a soft brush. If none of this solves your problem, your upholstery may have become permanently slippery due to possible cleaning with an alcohol-based cleaner. The only solution is to replace your saddle.
Probably the plate where the ball of the backrest should fall into is damaged. You can easily replace this part yourself. Click here to go to the repair form. On the repair form you can request the relevant plate. In your warranty period (which is three years), you do not pay any costs for this.
Test period
If you do not wish to keep the chair, BQE charges €75 for NL and €95 for BE, both excluding VAT transport and administration costs.
Click here to proceed to the trial period request page. You can read more about the terms and conditions here.
Ordering and delivery
You can use our online order form or contact us by phone.
Delivery time depends on the colour chosen. The delivery time of a chair in the standard colour black is 1 to 4 weeks. The delivery time of a chair in another colour is 4 to 6 weeks.
If you appreciate it, we will send you a quotation.
Based on your height and weight, we can choose the right composition for the Dynamic.
This represents the number of Newtons of the gas springs in the tilt mechanism, these determine the pressure with which the saddle tilts.
No, there are several partners at home and abroad trained by BQE to advise you on selecting the right chair. Click here to visit the partner page.
Design
No, we believe that when sitting for long periods of time, a back support is absolutely essential.
The chairs can be supplied with various gas spring lengths, please refer to the technical details on the page of your selected chair.
Please refer to the technical data on the page of your selected chair.
The ComfortMove and the CorrectSitCM are equipped with a wide backrest.
No, both cross-feet are equally strong provided they are loaded on 5 castors.
While this is possible, we would like to point out that a smaller cross base gives less stability as the support surface becomes smaller.
Depending on your requirements it could be possible, please contact us by phone.
Upholstery
We can supply almost all colours. Please consult the page of your chair of choice and go to "upholstery". Here you will find various colour charts.
In almost all cases, this is possible. If you let us know which upholstery is involved, we can give you a definite answer at very short notice.
Yes that is possible in some cases. The fabric of your choice will first be sent to the upholsterer for evaluation. Please contact customer service for this. We will let you know what dimensions may be required and how the further process will proceed.
It is possible. To do so, you need to supply the leather yourself. Please contact customer service for this.
No, you can't.
This is not recommended as the upholstery sticks somewhat to the seat foam. When removing the upholstery, there is a risk of damaging the foam layer.
One of our chairs, the ComfortMove, can be supplied in two different versions. In a proline (Sirona) and Trendline (Kavo) upholstery, seamless upholstery is possible but upholstery with stemskin upholstery is only possible with seam.
The Dynamic cannot be supplied seamless.
Yes, it exists and is available in different colours, please contact us.
The trendline / kavo upholstery is very slippery, so when the dynamic is tilted forward there may be a chance of sliding slightly forward which does not help optimal sitting.
Castors and accessories
Yes, two types of armrests can be fitted on each chair model. For this, please see the page of your chair of choice and go to "accessories". If you already have a chair and still want to fit armrests, you can easily fit them yourself.
If you now have a chair and still want to fit armrests, you can easily fit them yourself.
Yes, a foot control can be fitted on every chair model. If you already have a chair and still want a foot control, this can be arranged in our warehouse.
Yes, a foot ring can be placed on every chair.
This depends on your floor and personal preference. The unloaded braked castors are safe wheels, they ensure that your chair does not ride away when standing up. The disadvantage, however, of this is that there is a slightly higher chance of damaging the floor. The free-running castors come out best in the test by a flooring specialist, they leave little or no damage to the floor.
We supply unloaded braked castors, these are slightly braked when standing up and are free-running once you sit on the chair. We can supply other types of castors if required. For more information, please contact our customer service.
Yes, you can. The cross-foot is then fitted with "caps".
Maintenance
If you have a chair with artificial leather upholstery, it is best to clean it with soap and water (without alcohol) and a soft brush. For more information, go to the homepage and select the chair of your choice via "our products" and then go to "Upholstery and maintenance".
Yes, you can perfectly well maintain the chair yourself. To do so, go to the homepage and select "via "our products" the chair of your choice and go to "Upholstery and maintenance".
You can clean the wheels with water and soapy water, however, you cannot remove the caps of the wheels.
With the Dynamic, this is not recommended, you will slide too quickly in the tilted position. For the other models, too, we do not recommend using a cover because of the increased risk of slipping.
At the moment, we do not yet work with a maintenance contract. However, you can discuss any possibilities with us.
Technical questions
You will need a Phillips screwdriver for this. For more information, go to the homepage and select the "customer service" section. Under service and repair you will find a download on "how to replace my saddle".
You can easily fit armrests yourself on any chair. With the ComfortMove, you slide the armrests into the slots already fitted. With the Dynamic, CorrectSit and ErgoSolex, you first need to fit a connector. This is easy to fit yourself. For more information, go to the homepage and select the chair of your choice in the left-hand column. You can download the instructions under manuals.
To do so, go to the homepage and select the "customer service" section. On the service and repair form, under downloads, you can find the Dynamic disassembly form which tells you how to replace the gas spring.
It is best to check first whether you have a wide or narrow dynamic. On the gold-coloured sticker on the back of the chair, you will see a serial number. In this number is the letter B for Wide and S for Narrow. If you have the wide model, modification is possible. As the frame of the wide model is also different, the entire chair will have to be exchanged. If you already have the narrow model, no modification is possible.
It is best to have your saddle and back ball replaced as a whole. The upholstery often adheres to the foam layer. This can cause damage to the foam when the upholstery is replaced, which affects your sitting comfort.
Yes, you can. You can fit a higher gas spring. You gas spring has a length of 19, 23, 31 or 37 cm. measured at the wide part of the gas spring. To request a new gas spring using the service and repair form, select the "customer service" section on the home page. On this form you can also find how to replace the gas spring under downloads in the form "disassembly Dynamic".
Service and repair
Yes, in most cases you can.
Fill in the repair form for this purpose.
Based on a description of the problem, we can usually estimate the expected costs. Nevertheless, we let our technical service assess the required repair before carrying it out. Should his estimate not match what we have outlined to you, we will inform you accordingly. To request a repair, please go to the homepage and select the repair form under "customer service".
By appointment, you can drop the chair by our technical department at IJzerwerf 46, 2544 ES The Hague.
We advise against this. If you choose to do so, your warranty will be voided.
Yes, you can. You can remove the castors from the cross base (if necessary, use a screwdriver to lift them up) and replace the new castors. If this is difficult, you can use a little oil.
In most cases, we can fit a new lever/knob for you. To do so, go to the homepage and select the repair form under "customer service".
Your best bet is to replace your saddle (and back ball). To do so, go to the homepage and select the repair form under "customer service".
This is probably caused by a defect in the gas cylinder. If your chair is not older than three years, this is covered by warranty. Please contact us for this.
This is caused by a defect in the gas cylinder. If your chair is not older than three years, this is covered by warranty. Please contact us for this.
It may happen that the wheel "pin" in the cross base has some space, this can cause a click. You can solve this by removing the wheels from the cross-foot (possibly using a screwdriver to lift them up) and lubricating the top of the wheel "pin" with a bit of white acid-free Vaseline (on sale in bike shops). If this does not solve the problem, please contact us. Select customer service and navigate to the service and repair form.
You can remove the wheels from the cross base (if necessary, use a screwdriver to lift them up) and lubricate the top of the wheel "pin" with a little white acid-free petroleum jelly (on sale in bike shops). If this does not solve the problem, please contact us. Select customer service and navigate to the service and repair form.
Pricing and billing
You will receive the invoice by mail after delivery of your chair.
This is available by arrangement.
We may ask you to pay a deposit.
When ordering from five chairs, we can offer a discount.
Yes, the extra cost for a different colour (black is our standard colour) is 75 euros per chair. If you wish to combine several colours on one chair, the surcharge is 125 euros.
The Dynamic has an automatic tilt mechanism, which is a BQE-developed and patented precious system.
Yes, chrome is 50 euros more expensive.
Yes, prices shown are excluding VAT, 21% VAT is added.
Warranty
You have a three-year warranty on the chair. Click here to read more about our warranty and delivery conditions.
Upholstery also has a three-year warranty period. Bending in the upholstery is not covered by the guarantee.
Click here to read more about our warranty and delivery conditions.
We will make every effort to fix the problem but you are responsible for the cost.
Click here to read more about our warranty and delivery conditions.
Other questions
Yes, you can. To do so, go to the homepage and select the "customer service" section then go to request a brochure. To download brochures, please follow the same path.
We regularly attend trade fairs at home and abroad. Click here for a complete overview.
Relaxed and supported sitting position
With an ergonomic work chair
Do you perform your work mainly while sitting? Then it is very important to adopt the right posture. This will prevent physical complaints such as neck, shoulder and back pain and reduce strain on the body. Purchasing the right ergonomic chair can help.
Our ergonomic chairs encourage you to maintain the correct upright posture throughout the working day and provide additional long-term support. This ensures that you sit normally throughout the day, without suffering from complaints.
Not insignificantly, our good work chairs are known to roll lightly. Which is great if you need to move back and forth a lot. So we make your work just that little bit more pleasant.

Consultation: A suitable ergonomic work chair
Our specialists will be happy to advise you which work chair or office chair suits your type of work and preferences. The consultation takes place in our showroom in The Hague. You can try out various chairs here straight away. Our experts will provide you with further explanation on correct sitting posture and the importance of the correct working height. Our ergonomic work chairs are height-adjustable and have width/depth adjustable armrests.
So for example, if you are looking for a dental chair, physiotherapy chair or laboratory chair, come to BQE.
Practical but also stylish
For some, the style of the ergonomic work chair will be more important than others. We pay extensive attention to this too. So the look will fit in completely with the interior of your (home) office, salon or practice.
We offer the best ergonomic work chairs in a modern and sleek design. In addition, upholstery is available in every conceivable colour and colour combination. Want to make sure you choose the right colour for your working environment? Then we will be happy to send you our colour samples so you can make the ideal match yourself.